1. The jobs & different models of 3D Water fireplace

3D Custom Electric fireplace
 It is not gas, it is water only

Customized BB 3D fireplace

Has the following functions

Normal standard functions of unpressurized water source:

Intelligent automatic adding and stopping of purified water

Automatically shut down after 20 minutes of water shortage

The water pump will shut down automatically after 20 minutes of emptying.

Water overflow protection automatically shuts down in 3 seconds

Child lock quick electric drainage

Independent and easily replaceable LED long-life cold light source

Orange flame size adjustable

Scheduled shutdown selection

Dual-purpose operation using panel manual and remote control.

High-end functional options are priced separately

1. Imitation black titanium bright brushed stainless steel top plate.

2. Add perfume and aromatherapy functions freely.

3. Freely add formaldehyde-removing nano mineral crystal odor-absorbing materials with environmental protection functions.

4. Panel touch, remote control, and global Apple Android mobile APP Bluetooth three-way operation.

5. Reserve output line interface function for communication with smart home Internet of Things.

6. Heating function - bottom embedded type and rear embedded type.

7. Mobile phone Bluetooth music or USB music broadcast and control, commercial advertising loop broadcast function.

8. Color flame adjustment switching function.

9. Firewood explosion sound effect.

10. Each firewood sways and squirms out of synchronization with dark burning special effects.

11. It has a 24-hour flame-proof function when connected to the high-pressure water source of purified water in the whole house (the water pressure range is 1~10kgf/c㎡ for the engineering kilogram force).

12. Connecting function with commercial DMX512 programmable intelligent dimming console system.

13. The electronic water level meter displays the remaining fuel energy function.

14. It has the special function of being able to work outdoors in the rain and having a continuous flame that does not go out.

Product range: non-standard special-shaped customized electric fireplace, 100-240V voltage 3D flame atomization fireplace, real fire alcohol fireplace, gas fireplace, real fire wood-burning fireplace, hanging fireplace, 4D flame LCD screen electric fireplace, indoor and outdoor rain waterproofing Simulation flame generator for bonfires, braziers, torches, torches, vehicle-mounted fireplaces, aviation and firefighting special teaching training and drills.

E-mail : peter@bbfires.com

Hong Kong Tel: 852-69318059  

weixin：13714791523

Mr. Peter Ma

BB Fires 

BB 3D Water Vapour Electric Fireplace 

BB Fires 3D Mist Fireplace

[How to install a 3D mist fireplace? 】

Surface-mounted and wall-mounted atomizer fireplaces can be placed directly outside, but concealed and embedded atomizers

The fireplace needs to be installed in a pit in advance, with sockets pre-placed in it. The sockets should not be installed at the bottom of the pit to prevent accidental overflow and moisture.

A 15mm high air inlet should be left at the bottom of the pit directly in front. The air inlet is connected to the open space directly in front. The length of the air inlet is the same as the furnace core. The purpose is to allow cold air to flow in and circulate out from the upper part. The flame is upright, elegant and natural, and more dynamic. If there is no way to open an air inlet in the installation pit, you need to reserve multiple exhaust holes on the ceiling of the fireplace itself, or supplement it with a speed-adjustable exhaust device on the building directly above the fireplace.

There must be no negative pressure in the pit to suck the air outward (otherwise the flame will be sucked back and not flow upward). If the fireplace has a good fire shape outside the pit and the flame is put into the pit to suck the flame back, the problem of the draft in the pit must be solved first. to install!

After the atomized fireplace is installed, other objects such as stone, glass, steel plates, etc. cannot be pressed down for the sake of aesthetics. It must be easy to take out the entire fireplace for future maintenance and repair. Otherwise, such an unreasonable and willful design is extremely inappropriate and subsequent work The quantity is large and extremely troublesome. A multi-million dollar luxury car may break down, let alone just a fireplace.

[How to connect the fuel water supply inlet of atomized fireplace? 】

The water inlet of most atomized fireplaces is on the top plate. Some have to be filled manually. The method of taking out the water tank from the fireplace to manually refill the water, or using a measuring cup container to manually add water directly into it is cumbersome and has been eliminated, especially for extra-long ones. For atomized fireplaces, it is inconvenient to add water manually or add water one by one in multi-stage short water tanks, which is too out.

The smart water filling method is more user-friendly, simple and convenient. You only need to insert the water filling hose into the fireplace water filling port and portable bucket to automatically add water. The internal liquid level detection device and CPU computer chip will automatically recognize the water full command and stop adding water. , even if there is an accidental increase, the CPU computer chip dedicated to the atomizing fireplace will issue an overflow protection command and shut down.

The best way to replenish water is to hide a large bucket that can be easily replaced in the pit.

[Use tap water for mist fireplace? Or use purified water? 】

Because a relatively closed special atomizer mechanism is used to generate fog inside the atomizing fireplace, which is different from the open fogging installation environment of ordinary gardens and landscapes, it has certain requirements for water quality and requires the use of purified water. Otherwise, if tap water is used directly , because the atomization chamber is relatively closed, and there are a lot of calcium, minerals, and microorganisms in tap water, the water will soon appear to be clean, but it will be slippery to the touch. This slippery situation will soon block the atomizer. If it stays there, it will soon cause less fogging, or even no fogging, and it will be corroded and damaged.

[How to connect the water purifier outlet pipe to the atomizing fireplace water inlet? 】

Instead of temporarily moving water from the top with an external portable bucket, some sites use a semi-permanent method of adding water through the water outlet of the water purifier and a hose connected to the bottom side of the fireplace.

The state stipulates that the water pressure of general tap water in residential buildings is 0.07MPa, which is about 0.7Kg. At the same time, it also limits the water supply pressure of residential buildings to not exceed 0.35MPa to prevent high-pressure water jets from injuring people.

Nowadays, most of them are high-rise residential buildings. The water pressure of ordinary residents has been pressurized twice. The pressure is 0.3-0.5MPa, which is equivalent to a pressure of more than 3Kg. At least the end pressure at the entry point where the pressure is small is above 0.14MPa, which is equivalent to the lowest. 1.5Kg pressure or above.

However, the water inlet pump imported from Japan and South Korea inside the atomized fireplace can only withstand a pressure within 0.07MPa, which is equivalent to a pressure within 0.7Kg. The clean water source with the above pressure cannot be directly connected to the fireplace water inlet. Otherwise, the high The water pressure will break through the water pump diaphragm, causing the abnormal phenomenon that water is automatically and forcibly added to the fireplace without a water addition command. Water will rush into the interior of the fireplace core out of control, causing uncontrollable and unexpected failures.

At this time, a multi-stage pressure reducing valve must be connected and tested with a pressure gauge to ensure that the clean water pressure is lower than 0.07MPa.

WeChat: 13714791523

69318059

peter@bbfires.com.

BB 3D Water Vapour Electric Fireplace Specification

Waterproof three-dimensional electric fireplace for indoor use

Professionally customized fireplaces—to suit individual tastes

Brand new BB 3D fireplace-highlighting personal taste

This is not a gas, this is water

[What should I do if the atomized fireplace flame is blown down by the wind? 】

Because the specific gravity of fire mist is very low, it is easily affected by the direction of the surrounding air flow. The wind direction air flow at some installation sites may cause the flame to blow down, or some sections to roll back and droop to the bottom of the fire outlet. During installation, a 15cm high shield should be placed in front of the fireplace. Transparent glass, and check whether the air inlet is standardized or adjusted.

WeChat: 13714791523

69318059

peter@bbfires.com

It is not gas, it is water only

Black or White Pebbie three dimension fireplace

New BB 3D Water Fireplace

Brand new BB 3D fireplace-highlighting personal taste
  This is not a gas, this is water

Professionally customized fireplaces—to suit individual tastes

[How high is the flame of an atomized fireplace? 】【How to choose ultra-high flame atomization fireplace? 】

The flame of a general-purpose atomized fireplace is adjustable at about 10-30cm at the highest point in the room, and the most comfortable and beautiful flame viewing height is 15-20cm. After specially designed atomized fireplaces for special commercial purposes, the flames of ultra-high atomized fireplaces can reach 30-50cm, or even 1 meter to 3 meters high. Don't try to place a general-purpose atomized fireplace at a height higher than 1.7 meters to watch the fire. In that case, there will be basically no flame effect.

Contact person; Manager Ma

peter@bbfires.com

852-69318059

WeChat: 13714791523

Back to Top
Desktop Version
Powered by DIYTrade.com