[Is the mist 3D fireplace easy to break? How to maintain the mist fireplace atomizer? 】

The atomizing piece inside the atomizing fireplace vibrates at a frequency of 1.7 million times per second. Through the high-frequency resonance of the ceramic atomizing piece, the liquid water molecular structure is broken up to produce natural and elegant water mist, so there is no need to heat or add any chemicals. Reagents. Because the water hits the water and causes fog, there will be a slight amount of heat in the water tank. Therefore, after the machine has been continuously operated for a long time, the amount of fire mist will be slightly reduced and the flame height will be slightly reduced. This is normal. It is recommended to stop the machine for 30 minutes after working for 4 hours. Turn the machine on again to lower the water tank temperature, which will help delay the life of the atomizer head and prevent the water temperature from being too high and shortening its life. Although the machine has a built-in 60°C water temperature protection device.

In order to maintain the best flame, it is necessary to regularly clean the inner wall of the water tank and the surface of the atomizer (the atomizer is inside the water tank). The water we come into contact with is basically hard water. There are always invisible precipitates, causing calcium carbonate deposition, which will adhere to the atomizer piece. The core material of the atomizer piece is piezoelectric ceramics. One side of the piezoelectric ceramics is silver-plated. Yes, if there are too many oxidants in the air or there are too many impurity deposits in a humid environment, the silver will be oxidized and the conductivity will decrease. Finally, it will no longer conduct electricity and will not vibrate. The service life of atomizer tablets in an ideal laboratory environment is about 3,000 hours, but when used in products in actual complex installation environments, if the cleaning work is done well, the time will be reduced to 70%, but for the case where no cleaning and maintenance are performed, Under this condition, its lifespan will be greatly shortened to less than 30-40%! This shows the importance of cleaning work.

Even if purified water is used, even if it is a clean plastic container or stainless steel container, even if it is not used, the microorganisms and minerals in the water will produce greasy dirt over time. This principle is similar to that of bottled purified water at home. If you don't drink it for a long time, it will deteriorate. The greasy dirt will weaken the fogging performance of the atomizer and even block the atomizing head. Generally, at least every 1-2 months, you can use the drainage function to drain the stored water, then add water to the water tank, and wipe the inner wall of the water tank and the atomizer sheet with a clean cotton cloth until it feels smooth and free of dirt. Drain the sewage cleanly. This simple maintenance is very important!

Otherwise, greasy dirt and stains will clog the atomizer piece, reduce the amount of mist, and the flame will become smaller or even no fire. In this regard, Westerners are very good at maintaining atomized fireplaces. They respect scientific principles and will not complain without reason. Basically, every Change the water and clean it once every 15-30 days. From a Western perspective: Failure to change the water or clean it is regarded as man-made damage to the atomized fireplace. It is similar to driving a car without any maintenance, even a Mercedes-Benz and BMW worth millions. Early failure is worth learning. Many people in China never do any maintenance and upkeep after using atomized fireplaces. This does not respect the objective laws of science.

[Is the mist 3D fireplace easy to break? How to maintain the mist fireplace atomizer? 】

The atomizing piece inside the atomizing fireplace vibrates at a frequency of 1.7 million times per second. Through the high-frequency resonance of the ceramic atomizing piece, the liquid water molecular structure is broken up to produce natural and elegant water mist, so there is no need to heat or add any chemicals. Reagents. Because the water hits the water and causes fog, there will be a slight amount of heat in the water tank. Therefore, after the machine has been continuously operated for a long time, the amount of fire mist will be slightly reduced and the flame height will be slightly reduced. This is normal. It is recommended to stop the machine for 30 minutes after working for 4 hours. Turn the machine on again to lower the water tank temperature, which will help delay the life of the atomizer head and prevent the water temperature from being too high and shortening its life. Although the machine has a built-in 60°C water temperature protection device.

In order to maintain the best flame, it is necessary to regularly clean the inner wall of the water tank and the surface of the atomizer (the atomizer is inside the water tank). The water we come into contact with is basically hard water. There are always invisible precipitates, causing calcium carbonate deposition, which will adhere to the atomizer piece. The core material of the atomizer piece is piezoelectric ceramics. One side of the piezoelectric ceramics is silver-plated. Yes, if there are too many oxidants in the air or there are too many impurity deposits in a humid environment, the silver will be oxidized and the conductivity will decrease. Finally, it will no longer conduct electricity and will not vibrate. The service life of atomizer tablets in an ideal laboratory environment is about 3,000 hours, but when used in products in actual complex installation environments, if the cleaning work is done well, the time will be reduced to 70%, but for the case where no cleaning and maintenance are performed, Under this condition, its lifespan will be greatly shortened to less than 30-40%! This shows the importance of cleaning work.

Even if purified water is used, even if it is a clean plastic container or stainless steel container, even if it is not used, the microorganisms and minerals in the water will produce greasy dirt over time. This principle is similar to that of bottled purified water at home. If you don't drink it for a long time, it will deteriorate. The greasy dirt will weaken the fogging performance of the atomizer and even block the atomizing head. Generally, at least every 1-2 months, you can use the drainage function to drain the stored water, then add water to the water tank, and wipe the inner wall of the water tank and the atomizer sheet with a clean cotton cloth until it feels smooth and free of dirt. Drain the sewage cleanly. This simple maintenance is very important!

Otherwise, greasy dirt and stains will clog the atomizer piece, reduce the amount of mist, and the flame will become smaller or even no fire. In this regard, Westerners are very good at maintaining atomized fireplaces. They respect scientific principles and will not complain without reason. Basically, every Change the water and clean it once every 15-30 days. From a Western perspective: Failure to change the water or clean it is regarded as man-made damage to the atomized fireplace. It is similar to driving a car without any maintenance, even a Mercedes-Benz and BMW worth millions. Early failure is worth learning. Many people in China never do any maintenance and upkeep after using atomized fireplaces. This does not respect the objective laws of science.